IR6003/7+ IR Oil Mist/Smoke Detector
The IR6003/7+ Oil Mist/Smoke Detector has been specially designed to be highly sensitive to the presence of oil and kerosene mists or smoke particles in the path of the detector beam. The detector has been developed for use in enclosed oil rig well head areas, generator rooms, and turbine enclosures, with variants for both hazardous and safe area locations. The detector automatically compensates for detector lens contamination and signals when further deterioration cannot be tolerated and the lenses require cleaning.
P-UIM 6005/2
P-UIM 6005/2 Power Universal Interface Module has been designed to provide an interface between IR6003/7 Oil Mist Detector and the end user’s control equipment.
Flying Lead
2m connection cable between P-UIM 6005/2 and IR6003/7+
Reflector Type 1 on a Foamex board.
Reflector 620mm x 620mm
4-20mA Adapter.
If output signals in the from of fixed current levels in the range of 4-20mA are required them our 4-20mA adapter must be used.
Heavy Duty Mounting Bracket
Stainless steel bracket for mounting of IR6003/7+
U-Bracket
The U-Bracket provides a easily adjustable mounting arrangement for the Tyco IR6003/7+ Oil Mist Detector
IR Alignment tool
The target alignment tool is for the Infra- Red beam alignment of the Tyco IR6003/7+ Oil Mist Detector with its reflector during installation.
IR Test Film Tool
Tool for testing correct operation of the IR6003/7+ Oil Mist Detector.
Duct Reflector
The duct reflector size is 340mm x 340mm and is suitable for a range of 500mm to 3000mm rectangular ducts.
Duct Mounting Bracket
The duct mounting bracket enables the detector to be mounted on the outside of the equipment being monitored.
